TM 9-2350-277-34REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE — Continued 0115 0025. Install new encased oil seal (1) in cover plate (2).26. Pump oil through lower oil passage (3) until rear housing (4) is full.27. Lubricate new preformed packing (5) and install on cover plate (2). Install cover plate (2) on rear housing (4).28. Install six screws (6) and washers (7) to secure cover plate (2). TIGHTEN SCREWS TO 100-105 LB-IN (11-12 N m)TORQUE.29. Install protective plugs in three rear ports.30. Reverse housing assembly (8).31. Install fan pulley (3) on housing assembly (8). Secure pulley with six screws (6) and washers (7). TIGHTEN SCREWSTO 210-220 LB-IN (24-25 N m) TORQUE.0115 00-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business