TM 9-2350-277-34
NO DC OUTPUT FROM DC POWER SUPPLY (M1068A3 ONLY)Continued
0009 00
br4Y
1. Remove all power from SICPS system (see your -10) and
(TM 11-7010-256-12&P).
2. Install all circuits on power supplies PS1 (1) and PS2 (2).
3. Measure resistance between PS1 (+) OUTPUT terminal (3) and
DC bus bar at terminal 1 (4) of circuit breaker CB15 (5).
4. Does multimeter read 0 ohms?
YES
NO
br4YN
1. Replace lead 31E (WP 0090 00) and
(see your -20).
2. Verify no faults found.
0009 00-5