TM 9-2350-277-34
NO DC OUTPUT FROM DC POWER SUPPLY (M1068A3 ONLY)—Continued
0009 00
T
1. Remove jumper cable (1) from terminal J1 (2) on power supply
PS2 (3) and terminal J1 (4) on power supply PS1 (5).
2. Measure resistance between pins 9 (6) of jumper cable (1).
3. Does multimeter read 0 ohms?
YES
NO
brTN
1. Replace jumper cable (WP 0090 00).
2. Verify no faults found.
0009 00-2
