TM 9-2350-277-34
REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068A3 ONLY) — Continued
0096 00
12. Install four leads (1) on four binding posts (2).
13. Install connector J137 (3), gasket (4), dust cap (5), four screws (6), and new locknuts (7) on faceplate (8).
14. Install connector J8 (9), gasket (10), four screws (11), and new locknuts (12) on box (13).
15. Install new gaskets (14) by applying a thin coat of adhesive to box surface and to gasket surface. Allow 10 to 20 minutes
to dry (tacky to the touch). Position gasket on box (13) and press firmly into place.
16. Install faceplate (8), 14 new lockwashers, (15) and screws (16) on box (13).
FOLLOW-THROUGH STEPS
1.
Install tent interface panel box assembly (see your -20).
END OF TASK
0096 00-7/8 blank
