TM 9-2350-277-34
REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068A3 ONLY) — Continued
0096 00
NOTE
Do not remove gasket unless gasket is damaged.
2.
If any of four gaskets (5) are damaged, remove only the damaged gaskets from box (4).
NOTE
Tag all leads before disconnecting from connectors. Use wiring diagram page 0096 00–04.
3.
Remove four locknuts (6), screws (7), connector (8), and gasket (9) from box (4). Discard locknuts.
4.
Remove four locknuts (10), screws (11), dust cap (12), connector J137 (13), and gasket (14) from faceplate (3). Discard
locknuts.
5.
Disconnect four leads (15) from four binding posts (16).
0096 00-2
