TM 9-2350-277-34
REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068A3 ONLY) — Continued
0096 00
6.
Disconnect three lead terminals (1) from connector J11 (2).
7.
Disconnect three terminals (1) from connector J12 (3).
8.
Disconnect three lead terminals (1) from connector J13 (4).
9.
Remove 12 screws (5), locknuts (6), three dust caps (7), connectors (2), (3), and (4), and gaskets (8) from faceplate (9).
Discard locknuts.
10. Remove four screws (5), locknuts (6), J7 connector (10), and gasket (11) from box (12). Discard locknuts.
11. Remove two jamnuts (13) and connectors J9 and J10 (14) from box (12).
12. Remove two jamnuts (15) and connectors J113 and J114 (16) from faceplate (9).
13. Remove four screws (5), locknuts (6), connector J22 (17), gasket (18), and dust cap (19) from faceplate (9). Discard
locknuts.
14. Remove four binding posts (20) from faceplate (9).
15. Remove two locknuts (21), screws (22), and caps (23) from faceplate (9). Discard locknuts.
16. Remove six nuts (24), screws (25), washers (26), two catch assemblies (27), and pads (28) from box (12).
0096 00-3
