FOLLOW-THROUGH STEPS - TM-9-2350-277-34

REPLACE BURNER PACKING AND GASKET - TM-9-2350-277-34_571

REPLACE DIODE AND MOTOR RESISTOR - TM-9-2350-277-34_573

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
485

TM 9-2350-277-34 REPLACE BURNER PACKING AND GASKET — Continued 0082 00 INSTALLATION 1. Install new preformed packing (9) and new gasket (10) in groove of burner (4). 2. Place burner (4) in heater (8). Secure with four nuts (5), bolts (6), and clamps (7). 3. Install ground strap (3) on burner (4). Secure with screw (1) and washer (2). FOLLOW-THROUGH STEPS 1. Install fixed resistor (WP 0081 00). 2. Install fuel control valve (WP 0078 00). 3. Install engine coolant heater in carrier (see your -20). END OF TASK 0082 00-2

Privacy Statement
Press Release
Contact