TM 9-2350-277-34
INSTALL PERSONNEL HEATER KIT (M1064A3 ONLY) Continued
0073 00
35. Install two elbows (1)(2) on engine compartment bulkhead and secure with two locknuts (3).
NOTE
Replacing a flareless fuel hose or tube assembly may require new mating fittings such as a tee,
elbow or adapter.
36. Install plugs (4) and preformed packing (5) in ports 1 and 4 of fuel filter (6).
37. Install elbows (7)(8) and preformed packing (5) in ports 2 and 3 of fuel filter (6).
38. Position fuel filter (6) on sponson and secure with two screws (9), lockwashers (10), and washers (11).
39. Connect tube (12) to elbow (1) and elbow (7) with two sleeves (13) and nuts (14).
40. Connect hose (15) to elbow (2) and elbow (8) with two sleeves (13) and nuts (14).
41. Position shield (16) on sponson and secure with four screws (17), lockwashers (18) and washers (19).
42. Secure hose (20) to elbow (2) and nipple body (21) with two sleeves (13) and nuts (14).
0073 00-6