TM 9-2350-277-34
INSTALL PERSONNEL HEATER KIT (M1064A3 ONLY) — Continued
0073 00
50. Align heater duct (1), three insulator washers (2), and shield (3) with three front holes in front floor plates. Secure with
three new screws (4) and washers (5) from kit.
51. Install adapter (6) on heater plenum (7), and adapter (6) on heater duct (1). Secure with two latches (8).
52. Secure hose (9) to two adapters (6) with two clamps (10).
53. Remove two screws (11) and control box (12) from control box case (13).
54. Remove two screws, nuts, and washers supplied with control box case (13). Discard screws, nuts, and washers.
55. Secure control box case (13) to two weldnuts (14) with two lockwashers (15) and screws (16).
56. Secure control box (12) to control box case (13) with two screws (11).
57. Clean small area on transverse beam next to control box (12) and apply warning decal (see your -20).
0073 00-8
