TM 9-2350-277-34REPLACE RAMP HYDRAULIC CYLINDER ANCHOR (M1064A3 ONLY) — Continued 0065 00INSTALL1. Install new anchor (1) with three new washers (2) and new screws (3).2. TIGHTEN SCREWS TO 54-59 LB-FT (73-80 N.M) TORQUE. Use adhesive primer as lubricant on threads and underscrew heads.3. Install cylinder (4) on anchor (1) with headed pin (5). Secure with new cotter pin (6).FOLLOW-THROUGH STEPS1. Install mortar turntable and ring gear. See TM 9-1015-232-23&P.2. Install mortar in carrier (see your -10).3. Start engine (see your -10).4. Raise and lock ramp (see your -10).5. Stop engine (see your -10).END OF TASK0065 00-5/6 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
