TM 9-2350-277-34
TEST LOAD POWER PLANT SLING — Continued
0066 00
6.
Inspect sling for distortion. See TB 43-0142.
7.
Lower sling (7) to relieve weights (8) (10). Repeat inspection of any areas of distortion found in Step 6. See TB
43-0142. No permanent distortion is allowed.
8.
Remove cotter pin (4), nut (3), screw (2), and shackle (1) from hole (5). Discard cotter pin.
9.
Repeat WP 0066 00, Step 1 for second hole (13).
10. Repeat Steps 4 - 7.
11. Remove weights (8) (10) from sling (7).
0066 00-3
