TM 9-2350-277-34
REPAIR RAMP ACCESS DOOR (ALL EXCEPT M113A3) Continued
0059 00
4.
Remove two bushings (9) from two upper hinge parts (5) on ramp (6). Remove two shoulder bushings (10) from two
lower hinge parts (5).
INSTALLATION
NOTE
Shoulder bushings provide clearance between spacer and upper ramp hinge part. Replace
bushings that do not provide 1/16 inch (2 mm) clearance.
1.
Install two shoulder bushings (1) in two lower hinge parts (2) on ramp (3).
2.
Install two bushings (4) in two upper hinge parts (2) on ramp (3).
3.
Install two shoulder bushings (5) in two hinges (6) on ramp door (7).
0059 00-2