TM 9-2350-277-34REPLACE RAMP ACCESS DOOR AND HINGES (M113A3 ONLY) — Continued 0057 00INSTALLATIONNOTEShims are used as required for alignment and sealing of ramp door.1. Install two new shims (7), two hinges (6), and six screws (5) on ramp door (8). TIGHTEN SIX SCREWS TO 151-166FT-LB (205-225 N m) TORQUE.2. Install two new shims (3), two hinges (2), and six screws (1) on ramp (4). TIGHTEN SIX SCREWS TO 151-166 FT-LB(205-225 N m) TORQUE.3. Attach ramp door (8) to a suitable lifting device.NOTEEdge of door must be flush with ramp weldment within ± 1/8 inch (3 mm) around perimeterexcept where noted.4. Position ramp door (8) on ramp (4).0057 00-3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
