REPAIR RAMP ACCESS DOOR (ALL EXCEPT M113A3)

REPLACE RAMP ACCESS DOOR HINGE BEARINGS (M113A3 ONLY)

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
339

TM 9-2350-277-34 REPAIR RAMP ACCESS DOOR (ALL EXCEPT M113A3) 0059 00 THIS WORK PACKAGE COVERS: Removal (page 0059 00-1). Installation (page 0059 00-2). INITIAL SETUP: Maintenance Level Direct Support Tools and Special Tools General Mechanic’s Tool Kit (WP 0120 00, Item 62) Lifting device with rated lift capability of at least 200 lbs (91 kg) Personnel Required Track Vehicle Repairer 63H10 Helper (H) References See your -10 See your -20 Equipment Condition Ramp raised and locked (see your -10) Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) REMOVAL WARNING Door could fall and injure you. Make sure door is held by a lifting device before removing hinge screws. 1. Attach door to lifting device. 2. Remove two nuts (1), screws (2), and spacers (3) that secure ramp door (4) to four hinge parts (5) on ramp (6). Remove door from ramp. Have helper assist. 3. Remove two shoulder bushings (7) from two hinges (8) on ramp door (4). 0059 00-1

Privacy Statement
Press Release
Contact