REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued

REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued - TM-9-2350-277-34_268

REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) Continued - TM-9-2350-277-34_270

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
225

TM 9-2350-277-34 REPLACE CHASSIS TURRET WIRING HARNESS W8 (M901A3 ONLY) — Continued 0032 00 WARNING To prevent injury to personnel, verify that all grenades have been removed from smoke grenade discharger before removing components. 15. Hold left smoke grenade wiring harness connector (5) up to plate (17) and secure with jamnut (13). Have helper assist. 16. Connect wiring harness (5) to hull connector (12). 17. Install mounting base (4) on hull. Pass the loose end of the wiring harness (5) through the opening in the base (4). Secure with three screws (10) and washers (11). 18. Install brush guard (9) on hull. Secure with four screws (6), new lockwashers (7) and washers (8). 19. Position smoke grenade discharger (3) and connect wiring harness (5) to connector on discharger. 20. Install discharger (3) on mounting base (4) and secure with three washers (2) and screws (1). 21. Connect wiring harness lead W8P4 (1) to driver’s hatch proximity switch plug (2). 0032 00-11

Privacy Statement
Press Release
Contact