TM 9-2350-277-34
REPLACE ENGINE — Continued
0015 00
22. Connect ramp to tank hose (13) to elbow (14) on hydraulic tank (4).
23. Secure two hoses (11) and (13) with four new straps (15).
NOTE
Do not tighten generator mounting bracket screws until all the mounting screws have been
installed. All three screws require a specific torque.
24. Position generator mounting bracket (16) and install washer (17) and screw (18). TORQUE SCREW TO 32-34 LB-FT
(43-46 N m).
25. Align generator mounting bracket (16) holes. Install washer (19) and screw (20). TORQUE SCREW TO 36-38 LB-FT
(49-52 N m).
0015 00-25
