REPLACE ENGINE Continued - TM-9-2350-277-34

REPLACE ENGINE Continued - TM-9-2350-277-34_149

REPLACE ENGINE Continued - TM-9-2350-277-34_151

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
120

TM 9-2350-277-34 REPLACE ENGINE — Continued 0015 00 30. Install starter relay switch (13) on bracket (14) with two screws (15), washers (16), and new locknuts (17). 31. Install circuit leads 74D (18), 74C (19), and 74A (20) to solenoid battery terminals (21) and (22) and starter (23) with three nuts (24) and new lockwashers (25). 32. Install bracket (1) with screw (2) and washer (3) on engine. TIGHTEN SCREW TO 30-35 LB-FT (41-48 N m) TORQUE. 33. Position oil sample valve (4) on bracket (5) and secure with jam nut (6). 34. Install elbow (7) and nipple (8) on engine. 35. Install low oil pressure switch (9), tee (10) and two adapters (11) and (12) on elbow (7). 36. Install clamp (13) on low oil pressure switch (9) and secure to bracket (1) with two washers (14), nut (15), and screw (16). 0015 00-28

Privacy Statement
Press Release
Contact