INSTALLATION - TM-9-2350-277-20-6

REPLACE M25/M25A1 VFM HEATER (M981A3 ONLY)

REPLACE M25/M25A1 VFM HEATER BRACKETS (M981A3 ONLY)

TM-9-2350-277-20-6 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
344

TM 9-2350-277-20-6 REPLACE M25/M25A1 VFM HEATER (M981A3 ONLY) — Continued 0911 00 INSTALLATION NOTE Apply corrosion preventive compound to all threaded fasteners. 1. For left side VFM heaters, install VFM heater (13), four washers (11), new lockwashers (10), and screws (9). 2. For right side VFM heaters, install VFM heater (13), four washers (11), screws (9), and locknuts (12). 3. Install hose assembly (7) and clamp (6) on adapter (8). Tighten clamp securely. 4. Install hose assembly (4) and clamp (3) on adapter (5). Tighten clamp securely. 5. Connect power lead (1) to heater jack (2). FOLLOW-THROUGH STEPS 1. Connect battery ground leads (WP 0339 00). 2. Check air flow of NBC System. Follow procedures in TM 3-6680-316-10. END OF TASK 0911 00-2

Privacy Statement
Press Release
Contact