TM 9-2350-277-20-6
REPLACE M25/M25A1 VFM HEATER BRACKETS (M981A3 ONLY) — Continued
0912 00
INSTALLATION
1.
Install bracket (1) on hull. Secure with two screws (2), new lockwashers (3), and washers (4).
2.
Install communication station VFM heater (5) on bracket (1). secure with four screws (6), washers (7), and new
locknuts (8).
3.
Install bracket (9) on hull. Secure with two screws (10), new lockwashers (11), and washers (12).
4.
Install targeting station VFM heater (13) on bracket (9). secure with four screws (14), washers (15), and new
locknuts (16).
5.
Install orifice connector assembly (17) on bracket (9). Secure with screw (18), washer (19), new lockwasher (20), and
new locknut (21).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0912 00-3/4 blank
