TM 9-2350-277-20-6
REPLACE M25/M25A1 VFM ORIFICE CONNECTOR ASSEMBLY (M981A3 ONLY) —
Continued
0908 00
INSTALLATION
1.
Apply corrosion preventive compound to all threaded fasteners.
2.
At driver’s station and observation station, install mounting bracket (4) and secure with screw (5), new lockwasher (6),
and washer (7). At targeting station and communications station, install mounting bracket (4) and secure with screw (5),
two washers (7), and new locknut (8).
3.
Install orifice connector assembly (2) into mounting bracket (4) and install retaining ring (3).
4.
Install hose assembly (1) on orifice connector assembly (2).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
4.
Check air flow of NBC System. Follow procedures in TM 3-6680-316-10.
END OF TASK
0908 00-3/4 blank
