TM 9-2350-277-20-6
REPLACE STE/ICE CREW WIRING HARNESS (M1064A3 ONLY) — Continued
0881 00
2.
Install jack (1) on bulkhead (2) in power plant compartment. Secure with four screws (3), washers (4), and new
locknuts (5).
3.
Connect plug (6) to jack (1).
4.
Position wiring harness (7) along hull. Secure with eight clamps (8), washers (9), new lockwashers (10), screws (11),
one clip (12), and straps (13). Have helper assist. Use socket wrench.
5.
Install seven leads and grommets (14) in battery box (15).
0881 00-5
