REPLACE M3 NBC HEATER WIRING HARNESS (M1059A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-5_815

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
689

TM 9-2350-277-20-5 REPLACE M3 NBC HEATER WIRING HARNESS (M1059A3 ONLY) 0806 00 THIS WORK PACKAGE COVERS: Removal (page 0806 00-1). Installation (page 0806 00-3). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Strap (as required) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Battery ground strap disconnected (WP 0337 00) REMOVAL 1. Cut tie straps (1) that hold NBC wiring harness (2) to adjacent cables. Discard tie straps. 2. Remove screw (3), washers (4), and ground lead (5) from regulator bracket (6). 3. Disconnect wiring harness (2) from NBC control box (7). 4. Loosen screw (8) on mount (9) and remove ground lead (10). 5. Remove lead 538A (11) with ground lead (10) from air purifier (12). 0806 00-1

Privacy Statement
Press Release
Contact