TM 9-2350-277-20-5REPLACE M8A3/M3 NBC FILTER SWITCH ASSEMBLY (M1059A3 ONLY) — Continued 0804 00INSTALLATIONNOTEInstall following components, as needed, for repair of switch assembly.1. Install air filter ON lamp (1) on switch assembly (2). Secure with two screws (3) and new lockwashers (4).2. Install circuit breaker (5) on switch assembly (2). Secure with two screws (6), new lockwashers (7), and nuts (8).3. Install air filter switch (9) on switch assembly (2). Secure with two screws (10) and new lockwashers (11).4. Install switch assembly (2) on instrument panel (12). Secure with two mounting screws (13), four washers (14), and newlocknuts (15).5. Install circuit 537C lead (16) on air filter ON lamp (1) on switch assembly (2).6. Install circuit 579A lead (17) on circuit breaker (5) on switch assembly (2).7. Install jumper lead (18) on air filter switch (9) and circuit breaker (5).8. Install circuit 579C lead (19) on air filter switch (9) on switch assembly (2).FOLLOW-THROUGH STEPS1. Connect battery ground strap (WP 0337 00).2. Start engine (see your -10).3. Raise and lock ramp (see your -10).4. Stop engine (see your -10).END OF TASK0804 00-3/4 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
