TM 9-2350-277-20-5
REPLACE M13 NBC FILTER SWITCH (M1068A3 ONLY) Continued
0805 00
5.
Install switch assembly (2) on top plate. Secure with two mounting screws (13), washers (21) and new lockwashers (14).
Do not tighten screws at this time.
6.
Install circuit 579C lead (15) on air filter switch (9) on switch assembly (2).
7.
Install circuit 579A lead (16) on circuit breaker (5) on switch assembly (2) and Y-connector (17).
8.
Install circuit 537C lead (18) and ground lead (19) on air filter ON lamp (1) on switch assembly (2).
9.
Install cover (20) on air filter switch assembly (2). Tighten mounting screws (13) securing switch assembly to top plate.
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Start engine (see your -10).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0805 00-3/4 blank