REPLACE M8A3/M13 AIR PURIFIER AND FRAME (M577A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-5_643

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
535

TM 9-2350-277-20-5 REPLACE M8A3/M13 AIR PURIFIER AND FRAME (M577A3 ONLY) 0776 00 THIS WORK PACKAGE COVERS: Removal (page 0776 00-1). Installation (page 0776 00-2). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Locknut (4) Personnel Required Unit Mechanic References See your -10 See FM 21-40 TM 3-6680-316-10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Battery ground lead disconnected (WP 0338 00) REMOVAL WARNING Contaminated filters are hazardous to personnel. Use precautions when handling filters (see FM 21-40). Dispose of filters using trained chemical environment personnel. NOTE This task covers replacement of the M8A3 and the M13 air purifier and frame. Differences are noted in respective steps. 1. Disconnect power cable (1) from air purifier (2). 2. For M8A3 purifier, remove four hose quick disconnect fittings (4) from air purifier (2). For M13 purifier, loosen two clamps (3) and remove two couplings (5) and clamps from air purifier. 3. Unfasten latch (6) and lift air purifier (2) from frame assembly (7). 0776 00-1

Privacy Statement
Press Release
Contact