TM 9-2350-277-20-5
REPLACE SMOKE GENERATOR ADAPTER ACCESS PLATE AND GASKET (M1059A3
ONLY) — Continued
0766 00
NOTE
If only gasket is to be replaced, go to installation Step 1.
8.
Remove two jam nuts (3) and lockwashers (4) from two elbows (1). Remove elbows from plate (2). Discard lockwashers.
INSTALLATION
1.
Install two elbows (1) on adapter access plate (2). Secure with two jam nuts (3) and new lockwashers (4).
2.
Install gasket (5) on plate (2).
3.
Install dust cover (6) and fitting (7) on plate (2). Secure with four screws (8) and new locknuts (9).
4.
Install interior cable (18), four screws (16), and new locknuts (17) on adapter access plate (2)
5.
Connect exterior cable (15) to interior cable (18) on adapter access plate (2).
6.
Install plate (2) on hull. Secure with four screws (10) and new lockwashers (11).
7.
Connect electrical cable assembly (12) to plate fitting (7).
0766 00-3
