INSTALLATION - TM-9-2350-277-20-5

REPLACE FOG OIL PUMP ASSEMBLY (M1059A3 ONLY)

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
491

TM 9-2350-277-20-5 REPLACE AIR COMPRESSOR ASSEMBLY (M1059A3 ONLY) — Continued 0762 00 INSTALLATION 1. Position air compressor assembly (1) on ceiling of carrier. Have helpers assist. Secure with eight screws (2), new lockwashers (3), washers (4), and washers (5). TIGHTEN SCREWS TO 264-288 LB-IN (30-33 N m TORQUE. 2. Remove safety caps (6) from two air lines (7) and dust covers (8) from two air compressor reservoir fittings (9). Connect lines to fittings. 3. Connect air compressor electrical cable assembly (10) to compressor cable assembly connector (11). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00). 2. Set circuit breaker CB1 to ON (TM 3-1040-283-10). 3. Start engine (see your -10). 4. Raise and lock ramp (see your -10). 5. Stop engine (see your -10). END OF TASK 0762 00-3/4 blank

Privacy Statement
Press Release
Contact