TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER FUEL TUBE (ALL EXCEPT M1064A3) — Continued
0686 00
INSTALLATION
1.
Install fuel tube clamp (3) on replacement tube (4).
2.
Connect tube (4) to heater fuel filter inlet hose elbow (5) and nipple (7). Tighten nut (6).
3.
Secure tube (4) to power plant compartment bulkhead with clamp (3), screw (1), and new lockwasher (2).
FOLLOW-THROUGH STEPS
1.
Open main fuel tank shutoff valves (see your -10).
2.
Turn heater ON (see your -10). Check for proper operation and leaks.
3.
Turn heater OFF (see your -10).
4.
Install power plant rear access panels (WP 0439 00).
5.
Start engine (see your -10).
6.
Raise and lock ramp (see your -10).
7.
Stop engine (see your -10).
END OF TASK
0686 00-2
