TM 9-2350-277-20-4
REPLACE STEERING LOCK SOLENOID, BRACKET, LINKS, AND PINS
(SOLENOID-ACTIVATED LOCK) — Continued
0428 00
INSTALLATION
1.
Install three new spring pins (1) in bracket (2).
2.
Apply sealing compound to male threads of solenoid (3). Do not apply sealant beyond small end of tapered threads.
3.
Screw solenoid (3) into bracket (2).
4.
Install rod end (4) with jam nut (5) in plunger (6), approximately 1/2 inch distance of screw threads.
5.
Install spring (7) on locking pin (8).
6.
Install block (9) on locking pin (8). Secure with new spring pin (10).
0428 00-5
