TM 9-2350-277-20-4
REPLACE STEERING LOCK SOLENOID, BRACKET, LINKS, AND PINS
(SOLENOID-ACTIVATED LOCK) — Continued
0428 00
7.
Insert locking pin (8) between end holes of two links (11).
NOTE
The end of links with the 45
beveled elongated holes should be installed on locking pin. The
end of the links without the beveled elongated holes should be installed on the solenoid rod end.
8.
Install rod end (4) in link (11) end holes opposite locking pin (8). Secure with pin (12), two washers (13), and new cotter
pin (14).
NOTE
When installing links on bracket, make sure locking pin faces opposite solenoid.
9.
Install links (11) on bracket (2) and secure using pin (16), two washers (17), and new cotter pin (18).
10. Insert switch bracket (19) on two spring pins (1) on solenoid bracket (2).
11. Install switch (20) on solenoid bracket (2). Secure with lockwasher (21) and nut (22).
0428 00-6
