TM 9-2350-277-20-4
REPAIR NONSKID SURFACES (M981A3 ONLY) Continued
0605 00
b.
Strain thinned primer. Use standard commercial paint strainer.
NOTE
Apply primer quickly. Best results are from quick application rather than applying with
smooth patterned strokes.
c.
Apply zinc chromate primer with narrow brush (less than 4 inches wide).
d.
Allow first coat to dry at least one hour. Then apply second coat and allow to dry.
APPLY NONSKID
1.
Stir non-slip walkway compound thoroughly until mixture is uniform.
2.
Apply walkway compound to clean primed areas. Apply thin uniform coat 0.03 to 0.06 inch (0.76 to 1.54 mm) thick
using a paint brush.
3.
Allow walkway compound to dry 24 hours for maximum hardness.
END OF TASK
0605 00-3/4 blank