TM 9-2350-277-20-4
REPLACE/REPAIR OPERATOR’S SEAT (M1059A3 ONLY) — Continued
0567 00
5.
Tilt seat back (4) and install two springs (5) and pins (6) on seat back and seat pan (3).
INSTALLATION
1.
Install cushion (1) and two retainers (2) on seat back (3). Secure with four screws (4).
2.
Install cushion (5) and two retainers (6) on pan (7). Secure with four screws (8).
3.
Install retainer (9) and two screws (10) on pan (7) and cushion (5).
4.
Install seat belt (11) on bracket (12). Secure with screw (13), washer (14), and new locknut (15). TIGHTEN LOCKNUT
TO 264-288 LB-IN (30-32 N m) TORQUE.
5.
Install bracket (12) on box beam. Secure with two screws (16) and washers (17). TIGHTEN SCREWS TO 264-288
LB-IN (30-32 N m) TORQUE.
6.
Install seat belt (18) on bracket (19). Secure with screw (20), washer (21), and new locknut (22). TIGHTEN LOCKNUT
TO 264-288 LB-IN (30-32 N m) TORQUE.
0567 00-4
