TM 9-2350-277-20-4
REPLACE PERSONNEL SEATS, BACKRESTS, CUSHIONS, AND BELTS
(M1064A3 ONLY)
0550 00
THIS WORK PACKAGE COVERS:
Removal (page 0550 00-1).
Installation (page 0550 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Hand Blind Riveter (WP 0926 00, Item 44)
Materials/Parts
Cotter pin (10)
Locknut (4)
Rivet
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
1.
Remove two cotter pins (1), washers (2), headed pins (3), and backrest (4) from mounting lugs. Discard cotter pins.
NOTE
Do Steps 2 - 6 for left seat only.
2.
Remove four cotter pins (5), washers (6), two straight pins (7), and seat (8) from sponson brackets. Discard cotter pins.
3.
Remove four cotter pins (9), two straight pins (10), and two legs (11) from seat (8). Discard cotter pins.
4.
Remove four locknuts (12), washers (13), screws (14), and two seat belts (15) from seat (8). Discard locknuts.
5.
Remove two straps (16) and cushion (17) from seat (8).
0550 00-1
