REMOVAL (cont) - TM-9-2350-277-20-4

REPLACE ROAD WHEEL HUB - TM-9-2350-277-20-4_53

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
17

TM 9-2350-277-20-4 REPLACE ROAD WHEEL HUB — Continued 0416 00 2. Remove cotter pin (5), nut (6), washer (7), and hub (4) from road wheel support arm (8). Discard cotter pin. 3. Remove seal (9), outer bearing (10), and inner bearing (11) from hub (4). Discard seal. 4. Remove grease fitting (12) and relief valve (13) from hub (4). 5. If damaged, remove bolt(s) (14) from hub (4). Discard bolt(s). 6. If damaged, remove bearing cups (15) and (16) from hub (4). Discard cups. CLEANING CAUTION Bearings must be replaced as assemblies. Do not mix cups and bearings. 1. Clean and inspect bearings in accordance with TM 9-214. Replace bad bearings and cups. 0416 00-2

Privacy Statement
Press Release
Contact