TM 9-2350-277-20-4
REPAIR DRIVER’S HATCH (M901A3 AND M981A3 ONLY) — Continued
0538 00
10. Remove six screws (1), washers (2), two pins (3), and block (4) from support (5).
11. Remove two screws (6), washers (7), bracket (8), and shim (9).
12. Remove two cotter pins (10), pin (11), washer (12), washer (13), link (14), washer (15), washer (16), link (17), spacer
(18), and washer (19). Discard cotter pins.
13. Remove spring pin (20), pin (21), spring (22), spring (23), and link (24). Discard spring pin.
CLEANING
1.
Clean parts with cleaning compound.
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Inspect parts for corrosion, distortion, cracks, and broken or missing parts.
REPAIR OR REPLACEMENT
1.
Repair or replace damaged and missing parts.
2.
Replace hatch seal.
a.
Remove seal (1) from hatch (2). Discard seal.
0538 00-10
