TM 9-2350-277-20-4
REPLACE DRIVERS HATCH COVER AND EXTERIOR LOCK (ALL EXCEPT M901A3 AND
M981A3) Continued
0531 00
1.
Remove two locknuts (1), screws (2), and retainer (3) from hinge brackets. Discard locknuts.
2.
Support cover (4). Remove springs (5), shield (6), two fiber washers (7), and cover from hinge brackets.
3.
Remove locknut (8) and screw (9) from cover (4). Discard locknut.
4.
Pry up end of seal (10) and remove from cover (4). Discard seal.
0531 00-2