TM 9-2350-277-20-4
REPLACE ROAD WHEEL SUPPORT ARM, BEARINGS, AND SEALS — Continued
0415 00
3.
Remove two screws (1), four screws (4), road wheel support arm housing (2), packing (3), and guard (5) from hull
(number four and five positions).
4.
Remove six screws (1), three washers (2), seal (3), retainer (4), and gasket (5) from housing (6). Discard washers, seal
and gasket.
5.
Remove support arm (7), seal (8), and spacer (9) from housing (6). Discard seal.
6.
If needed, remove two bearings (10) from housing (6).
0415 00-2
