TM 9-2350-277-20-4
REPLACE RAMP DOOR HANDLES AND SHAFT
0519 00
THIS WORK PACKAGE COVERS:
Removal (page 0519 00-1).
Installation (page 0519 00-2).
Adjustment (page 0519 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanics Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Locknut
Lockwasher (2)
Preformed packing
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp raised and locked (see your -10)
REMOVAL
1.
Remove pin (1), two washers (2), and door lock (3) from mount on ramp.
2.
Remove locknut (4), inside handle (5), and inside washer(s) (6), and spacer (7) from shaft (8). Discard locknut.
3.
Remove key (9) from shaft (8).
4.
Remove two screws (10), lockwashers (11), washers (12), and outside handle (13) from shaft (8). Discard lockwashers.
5.
Remove shaft (8), washer(s) (14), and preformed packing (15) from ramp (16). Discard packing.
0519 00-1