REMOVAL - TM-9-2350-277-20-4

REPLACE COMMANDERS HATCH HOOK AND BUMPER (M577A3 AND M1068A3 ONLY)

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
295

TM 9-2350-277-20-4 REPLACE COMMANDER’S HATCH HOOK AND BUMPER (M577A3 AND M1068A3 ONLY) — Continued 0501 00 REMOVAL WARNING Falling hatch could seriously injure you. Keep head lower than closed hatch position when opening or closing hatch. Keep hands clear of hatch rim when closing. Make sure latch pin or mechanism is fully engaged when hatch is in any open position. 1. Open both ends of hook (1). Remove from chain (2) and hull bracket. 2. Remove tube (3) from chain (2). 3. Open both ends of hook (4). Remove from chain (2) and quick release pin (5). 4. Remove two screws (6), nuts (7), four washers (8), and block (9) from bracket. 5. Remove locknut (10), washer (11), bumper (12), and washer (13) from hull brackets. Discard locknut. 0501 00-2

Privacy Statement
Press Release
Contact