ADJUSTMENT - TM-9-2350-277-20-4

ADJUSTMENT (cont) - TM-9-2350-277-20-4_312

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
245

TM 9-2350-277-20-4 REPLACE MORTAR HATCH EXTERIOR CATCHES AND BUMPERS (M1064A3 ONLY) — Continued 0480 00 ADJUSTMENT 1. Adjust LEFT and CENTER exterior latches as follows: a. Open hatch sections. b. Loosen screws (1). Move latch bolt bracket (2) to get 5/8 in (16 mm) between end of bracket (2) and edge of catch (3). c. If above adjustment cannot be made, loosen screws (4) and move catch (3) to get above measurement. d. Remove or install shims (5) between bumper (6) and hull so that tee head bolt (7) protrudes into catch (3) a distance of 3/8 to 13/16 in (10 to 21 mm) with center door section firmly against bumper. e. Tighten screws (1) on bracket (2). f. TIGHTEN SCREWS (4) ON CATCH (3) AND TORQUE TO 360-420 LB-IN (41-47 N m). 0480 00-5

Privacy Statement
Press Release
Contact