REMOVAL - TM-9-2350-277-20-4

REPLACE MORTAR HATCH EXTERIOR CATCHES AND BUMPERS (M1064A3 ONLY)

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
242

TM 9-2350-277-20-4 REPLACE MORTAR HATCH EXTERIOR CATCHES AND BUMPERS (M1064A3 ONLY) — Continued 0480 00 1. Remove two cotter pins (1) from headed pins (2). Discard cotter pins. 2. Remove two headed pins (2) and clevises (3) from tee head bolt (4) and arm (5). 3. Remove two clevises (3) from chain (6). 4. Remove spring pin (7), handle (8), spring (9), and washer (10) from arm (5). Discard spring pin. Remove arm from hull top plate. 5. Remove two nuts (11) from tee head bolt (4). Remove tee head bolt and spring (12) from latch bolt bracket (13). NOTE Latch bolt bracket for center door section is mounted on right door section. Bracket for right door section does not have four spacers installed. 6. Remove four screws (14), lockwashers (15), spacers (16), and latch bolt bracket (13) from hull top plate. Discard lockwashers. 0480 00-2

Privacy Statement
Press Release
Contact