TM 9-2350-277-20-4
REPLACE POWER PLANT DOOR (M113A3 ONLY) — Continued
0470 00
2.
Remove two screws (1) and washers (2) from housing (3) and bracket (4). Remove housing.
3.
Remove nine springs (5) and place on something clean.
4.
Remove four screws (6), washers (7), two brackets (4), shims (8), and power plant door (9) from hull.
5.
Remove two spacers (10) from ends of power plant door (9).
NOTE
Spacers in Step 6 (up to three on each side) are used as required.
6.
Remove spacers (11) from ends of power plant door (9).
7.
Remove shield (12) from power plant door (9).
0470 00-2
