TM 9-2350-277-20-3
REPLACE TRANSMISSION RANGE CONTROLLER LAMP — Continued
0388 00
INSTALLATION
1.
Install new preformed packing (10) on lamp (4).
2.
Install lamp (4) into clamp (9).
3.
Place filter (5) and shield (6) properly over lamp (4). Secure by tightening screw (7) and nut (8) on clamp (9).
4.
Install cover (2) on range controller (3). Secure with two wing screws (1).
FOLLOW-THROUGH STEPS
1.
Install transmission range controller (WP 0386 00) or (WP 0387 00).
END OF TASK
0388 00-2
