TM 9-2350-277-20-3
REPLACE TRANSMISSION RANGE CONTROLLER/BRACKET (USED WITH
SOLENOID-ACTIVATED STEERING LOCK) Continued
0386 00
INSTALLATION
1.
Connect wiring harness (10) to controller (9).
2.
Install bracket (5) on bulkhead. Secure with three screws (11), six washers (12), and three new locknuts (13).
3.
Install four mounts (4) on controller (9) and secure with four screws (6), new lockwashers (7), and washers (8).
4.
Install controller (9) with four mounts (4) on bracket (5). Secure with four screws (1), new lockwashers (2), and
washers (3).
FOLLOW-THROUGH STEPS
1.
Install drivers power plant access panel (see your -10).
END OF TASK
0386 00-3/4 blank