TM 9-2350-277-20-3
REPLACE BATTERIES AND RETAINERS (M113A3, M901A3, AND M1059A3 ONLY) —
Continued
0346 00
3.
Install two bolts (1) in slots of battery frame (2). Turn bolts to secure.
4.
Install two retainers (3) on two bolts (1). Secure with two washers (4) and new locknuts (5).
5.
Install clamp (6) on two retainers (3). Secure with washer (7) and bolt (8).
FOLLOW-THROUGH STEPS
1.
Install battery terminals (WP 0340 00).
2.
Install battery access cover (see your -10).
3.
Connect battery ground strap (WP 0337 00).
4.
Turn MASTER SWITCH ON to check that batteries are installed right. MASTER SWITCH ON light should come on
(see your -10).
5.
Start engine (see your -10).
6.
Raise and lock ramp (see your -10).
7.
Stop engine (see your -10).
END OF TASK
0346 00-5/6 blank
