REPLACE BATTERIES AND RETAINERS (M113A3, M901A3, AND M1059A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-3_415

TM-9-2350-277-20-3 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
338

TM 9-2350-277-20-3 REPLACE BATTERIES AND RETAINERS (M113A3, M901A3, AND M1059A3 ONLY) 0346 00 THIS WORK PACKAGE COVERS: Removal (page 0346 00-1). Cleaning and Inspection (page 0346 00-3). Installation (page 0346 00-4). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Bituminous coating compound (WP 0928 00, Item 13) Epoxy coating kit (WP 0928 00, Item 30) Sodium bicarbonate (WP 0928 00, Item 60) Locknut (2) Locknut (4) Personnel Required Unit Mechanic Helper (H) References See your -10 TM 9-6140-200-14 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Spall liners opened (see your -10) Battery ground strap disconnected (WP 0337 00) Battery access cover removed (see your -10) Battery terminals removed (WP 0340 00) REMOVAL NOTE Four batteries and four retainers are replaced the same way. 1. Remove bolt (1), washer (2), and clamp (3) from two retainers (4). 2. Remove two locknuts (5), washers (6), and retainers (4) from two bolts (7). Discard locknuts. 3. Turn bolts (7) to align with slot in frame (8). Remove bolts from frame. 0346 00-1

Privacy Statement
Press Release
Contact