TM 9-2350-277-20-3
REPLACE UTILITY OUTLET RECEPTACLE (ALL EXCEPT M981A3) — Continued
0265 00
4.
Remove two screws (10), lockwashers (11) and receptacle (12) from master switch panel (8). Discard lockwashers.
5.
If needed, remove grommet (13) from master switch panel (8).
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check connectors. Replace cracked or broken connector (WP 0382 00)
INSTALLATION
1.
If removed, install new grommet (1) from master switch panel (2).
NOTE
Make sure receptacle cover retaining chain is installed on lower screw.
2.
Place utility outlet receptacle (3) on rear of panel (2). Secure with two new lockwashers (4) and screws (5).
3.
Route utility outlet receptacle lead (6) through grommet (1). Install shell connector (7) and slotted washer (8).
0265 00-2
