TM 9-2350-277-20-2
REPLACE EXHAUST MUFFLER AND BRACKET
0224 00
THIS WORK PACKAGE COVERS:
Removal (page 0224 00-1).
Installation (page 0224 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Cotter pin
Locknut (2)
Lockwasher (2)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Trim vane lowered (see your -10)
Power plant front access door opened (see your -10)
Power plant grill raised (WP 0464 00)
Exhaust elbows removed (WP 0221 00)
Muffler extension and cap removed (WP 0223 00)
REMOVAL
1.
Remove two screws (1), four washers (2), and two locknuts (3) that secure muffler (4) to bracket on hull.
Discard locknuts.
2.
Loosen clamp (5) securing muffler (4) to connector on air cleaner.
3.
Remove two screws (6), lockwashers (7), and washers (8) that secure bracket (9) to sponson.
Remove muffler (4) from carrier. Discard lockwashers.
4.
Remove cotter pin (10) and straight headed pin (11) from muffler (4) and bracket (9). Remove bracket. Discard
cotter pin.
0224 00-1
