TM 9-2350-277-20-2
REPLACE HAND THROTTLE CONTROL CABLE ASSEMBLY — Continued
0219 00
ADJUSTMENT
1.
Loosen set screw (3). Push control cable handle (8) full forward.
2.
Place accelerator pedal (9) in full closed throttle position. Tighten set screw (3) in collar (2).
3.
Operate hand throttle control cable (1) and accelerator pedal. Check that control cable does not bind.
FOLLOW-THROUGH STEPS
1.
Install power plant front access cover (WP 0449 00).
2.
Install driver’s power plant access panel (see your -10).
3.
Close power plant front access door (see your -10).
4.
Raise trim vane (see your -10).
END OF TASK
0219 00-6
