TM 9-2350-277-20-2
REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY — Continued
0220 00
3.
Remove cotter pin (1), washer (2), and headless shoulder pin (3) from engine governor fuel control arm (4). Discard
cotter pin.
4.
Loosen two setscrews (5). Remove two collars (6) and headless shoulder pin (3) from fuel cutoff control cable (7).
5.
Remove nut (8), two washers (9), and screw (10), from clamp (11). Pull fuel cutoff control cable (7) from engine
governor control housing (12).
6.
From power plant compartment, remove nut (13) and washer (14) from fuel cutoff control cable handle (15).
0220 00-2
